Permit(s) needed for a Pump Contractor

Revised on: June 29, 2016 - 12:30pm

What is a Pump Contractor:

You may need all or some of the following permits:

 1.04 GP: Discharge from a Facility that Receives Water from a Well if Discharge is to the Same Aquifer: “Type 1 General Permit: No notification is required, however, best management practices (BMPs) must be followed.”

water_icon.png

 1.05 GP: Discharge of Backwash or Condensate if less than 1000 Gallons Per Day: “Type 1 General Permit: No notification is required, however, best management practices (BMPs) must be followed.”

water_icon.png

 1.08 GP: Toilet or Privy: “Type 1 General Permit: No notification is required, however, best management practices (BMPs) must be followed.”

water_icon.png

 If you discharge water pollutants, you may need an Individual APP | Learn More >

water_icon.png

 If your industry has stormwater discharges due to mining, then you may need an AZPDES MSGP Mining Permit | Learn More >

water_icon.png

 If your industry has stormwater discharges, you may need an AZPDES Industrial Stormwater Non-Mining MSGP | Learn More >

water_icon.png

 If your industry has certain types of non-stormwater discharges to surface waters, then you many need an AZPDES De Minimis GP | Learn More >

This listing may not be comprehensive depending upon the specifics of your facility. Additional permits or registrations may be needed, therefore ADEQ recommends you contact the Permit Liaisons if unsure of permit requirements.